Is the ribbon cable between CD-ROM drive and EIDE controller attached correctly?
Action:
WARNING: Electrical shock hazard! Make sure the power is turned off and the external power cables have been disconnected before removing the computer cover.
CAUTION 1: This task should be performed by a qualified computer technician.
CAUTION 2: Please observe steps to reduce the potential damage to computer components from electro-static discharge.
CAUTION 3: Turn off and unplug the computer before removing the computer cover.
1) Check to see if the color keyed side of the ribbon cable connector is connected to the pin one position of the CD-ROM drive and the EIDE controller.
NOTE: If there another drive device is connected EIDE controller with the CD-ROM, make sure that the color keyed side of the ribbon cable connector is connected to the pin one position on the other device.
2) If the color keyed side of the ribbon cable is not connected to pin one, unplug the cable and reconnect the cable so that the color keyed side matches pin one.
Question:
Is the ribbon cable between CD-ROM drive and EIDE controller attached correctly?
Responses:
Yes, ribbon cable is attached correctly
No, ribbon cable is attached incorrectly
